Startmenge Erstbeladung; Set Contrast - Strebel Pelletskessel Dragon 1.22 Bedienungsanleitung

Dragon 1.22

6.13 Startmenge Erstbeladung

In diesem Untermenü kann die Pelletsschnecke
manuell aktiviert werden. Um die Schnecke zu ak-
tivieren, wählen Sie „ON" mit P4 (^) bzw. P6 (v) und
bestätigen Sie die Auswahl mit P3 (SET). Um den
Vorgang zu stoppen, wählen Sie „OFF" an und bestä-
tigen Sie die Auswahl.
600 Sekunden nach der manuellen Betätigung stoppt die Schne-
cke automatisch.
Der Kessel darf während der manuellen Beladung nicht im
Betriebsmodus sein!
6.14 Sommer-/Wintermodus
Im Wintermodus ist Heizung und Warmwasserbetrieb vorgese-
8.2.13 Summer - Winter Menu
Menu to modify the plumbing plant functioning according to the season. On display appears one of these
hen; im Sommermodus nur Warmwasserbetrieb. Ist der Winter-
modus aktiv, ist am Display
symbols:
angezeigt.
, .
6.15 Sprache
8.2.14 Language Menu
This Menu allows to change the language of LCD panel.
Hier können Sie die gewünschte Sprache der Rege-
lungsoptionen einstellen. Wählen Sie mit P4 (^) bzw.
P6 (v) eine Sprachoption an und bestätigen Sie die
Time and Date
Auswahl mit P3 (SET).
Remote Control
Calibration
6.16 Bedienfeld-Menü
Load
Hier können Sie den gewünschte Display-Kontrast
Language____________
(Contrast) und die minimale Belechtungsstärke (Mi-
__
nimum Light) einstellen. Wählen Sie mit P4 (^) bzw.
Menu Tastiera
P6 (v) eine Sprachoption an und bestätigen Sie die
Auswahl mit P3 (SET).
8.3 Keyboard Menu
Menu Sistema
Menu to set the contrast and light of LCD panel.
Keyboard Menu_______
System Menu
8.3.1

Set Contrast

This Menu allows to set the display contrast.
Set Contrast
Set Minimum Light
Push the buttons P4 and P6 to increase or decrease the contrast; P3 to save and exit, P1 to exit without
save.
8.3.2 Set Minimum Light
This Menu allows to set the display light when you don't push any button.
The system has 10 calibration's steps (the 0 value is set by the factory). For each step the value is increased
or decreased of a per cent value (the per cent value is set in the Step Calibration Menu of System Menu).
The calibration's effect is valid only in Run Mode and in Modulation for the current recipe.
8.2.12 Load Menu
This menu allows load manually the Auger or the brazier.
8.2.13 Summer - Winter Menu
The loading stops automatically after 600 seconds.
Menu to modify the plumbing plant functioning according to the season. On display appears one of these
loading.
symbols:
NOTE: when the auger is manually started the Exhaust Fan switches on in order to close pins 13-14 (HV2)
for the power supply of the auger.
8.2.13 Summer - Winter Menu
8.2.14 Language Menu
Menu to modify the plumbing plant functioning according to the season. On display appears one of these
This Menu allows to change the language of LCD panel.
symbols:
8.2.13 Summer - Winter Menu
Menu to modify the plumbing plant functioning according to the season. On display appears one of these
8.2.14 Language Menu
symbols: 8.2.13 Summer - Winter Menu
This Menu allows to change the language of LCD panel.
8.2.13 Summer - Winter Menu
Menu to modify the plumbing plant functioning according to the season. On display appears one of these
8.2.14 Language Menu
symbols:
sichtbar. Im Sommermodus wird
This Menu allows to change the language of LCD panel.
, .
8.2.14 Language Menu
8.3
Menu to set the contrast and light of LCD panel. This Menu allows to change the language of LCD panel.
8.2.14 Language Menu
8.3
Time and Date
Menu to set the contrast and light of LCD panel.
Remote Control
8.3
Calibration
8.3.1
Menu to set the contrast and light of LCD panel.
Load
This Menu allows to set the display contrast.
8.3
Language____________
Menu to set the contrast and light of LCD panel.
__
8.3.1
Menu Tastiera
This Menu allows to set the display contrast.
8.3 Menu Sistema Keyboard Menu
8.3.1
Push the buttons P4 and P6 to increase or decrease the contrast; P3 to save and exit, P1 to exit without
This Menu allows to set the display contrast.
save.
Keyboard Menu_______
8.3.1
8.3.2
System Menu
This Menu allows to set the display contrast.
This Menu allows to set the display light when you don't push any button.
Push the buttons P4 and P6 to increase or decrease the contrast; P3 to save and exit, P1 to exit without
save.
8.3.2
Push the buttons P4 and P6 to increase or decrease the contrast; P3 to save and exit, P1 to exit without
This Menu allows to set the display light when you don't push any button.
8.3.1 Set Contrast
save.
8.3.2
Push the buttons P4 and P6 to increase or decrease the contrast; P3 to save and exit, P1 to exit without
save.
This Menu allows to set the display light when you don't push any button.
Push the buttons P4 and P6 to increase or decrease the light; P3 to save and exit, P1 to exit without save.
Set Contrast
8.3.2
_____
Set Minimum Light
This Menu allows to set the display light when you don't push any button.
Push the buttons P4 and P6 to increase or decrease the light; P3 to save and exit, P1 to exit without save.
Push the buttons P4 and P6 to increase or decrease the light; P3 to save and exit, P1 to exit without save.
Push the buttons P4 and P6 to increase or decrease the light; P3 to save and exit, P1 to exit without save.
8.3.2 Set Minimum Light
Language
Kesselregelung
Time and Date
Remote Control
Calibration
Load __________
Language
, .
, .
Time and Date
Remote Control
Calibration
, .
Pag 17/45
Load
Language____________
Time and Date
, .
__
Remote Control
Menu Tastiera
Calibration
Menu Sistema Keyboard Menu
Load
Time and Date
Language____________
Remote Control
__
Calibration
Keyboard Time and Date Menu_______
Menu Tastiera
Load
Remote Control
System Menu
Keyboard Menu
Menu Sistema
Language____________
Calibration
__
Load
Español
Menu Tastiera
Language____________
Keyboard Menu_______
Menu Sistema Keyboard Menu
Française
__
System Menu
Set Contrast
Menu Tastiera Deutsch
Keyboard Menu
Menu Sistema
Keyboard Menu_______
English
Set Contrast _____
System Menu
Italiano______________
Set Minimum Light
Set Contrast
Keyboard Menu_______
System Menu
Set Contrast _____
Set Contrast
Set Minimum Light
Set Contrast
Set Contrast _____
Set Contrast
Set Minimum Light
Set Minimum Light
Set Minimum Light
Set Contrast _____
Set Contrast
Set Minimum Light
Set Minimum Light
Set Minimum Light
Set Contrast
Set Minimum Light
Set Minimum Light
_____
Set Minimum Light
Set Contrast
Set Contrast
Set Minimum Light
Set Contrast
+
Set Minimum Light
15
-
Pag 18/45
Modelländerungen vorbehalten.
Maße unverbindlich!
Pag 18/45
Load
ON
OFF________________
The system has to be in Off State to do the
Español
Française
Deutsch
DMAN802000055- SY250 Hydro Technical Manual
English
Italiano______________
Español
Française
Deutsch
English
Español
Italiano______________
Française
Deutsch
Español
Set Contrast
English
Française
Set Minimum Light
Italiano______________
Deutsch
Español
English
Française
Italiano______________
Set Contrast
Deutsch
Set Minimum Light
English
Set Contrast
Italiano______________
Set Contrast
Set Minimum Light
Set Contrast
Set Minimum Light
Set Contrast
Set Contrast
Set Contrast
Set Minimum Light
Set Contrast
Set Minimum Light
Set Minimum Light
Set Contrast
Set Minimum Light
_____
+
Set Minimum Light
-
DMAN802000055- SY250 Hydro Technical Manual
DMAN802000055- SY250 Hydro Technical Manual
_____
+
15
-
_____
+
15
_____
-
+
_____
15
-
+
+
15
5
-
9
-
+
_____
5
9
-
+
15
5
9
-
+
5
9
-
27