Installing Drivers - i-tec C31DUAL4KDP Gebrauchsanweisung

i-tec USB-C Dual Display Port Adapter
For ordinary work on multiple monitors
Processor: Intel Core i5 2+GHz / AMD Trinity or better
ź
RAM: 4GB
ź
Graphics processor: Intel HD 4000, ATI Radeon HD7xxx, NVidia GeForce 5xxM or better
ź
USB-C or Thunderbolt 3 port
ź
For video playback
Procesor: Intel Core i7 2+GHz / AMD Richland A10-575x / AMD Kaveri A10-7400P or better
ź
RAM: 8GB
ź
Graphics processor: Intel HD 4000, ATI Radeon HD 8650, NVidia GeForce 7xxM or better
ź
USB-C or Thunderbolt 3 port
ź
For Ultra HD 4K video playback the computer must be able to decode the video using its primary
graphics processor. Low end laptops can be able to playback the video but the quality might be
less than ideal (video interruption, screen tearing).

INSTALLING DRIVERS

Once connected, the drivers for the adapter are automatically installed from the system. Before
installing, make sure that the latest drivers for your device and updated BIOS are installed in your
system.
CONNECTING A DISPLAY PORT MONITOR
The adapter is equipped with 2x Display Port 4K for connecting an external monitor or projector
with Display Port interface. As imaging equipment, advanced plasma and LCD monitors and TVs
can be used. Graphics chips, that are the "heart" of the adapter, support up to 2x 4K (Ultra HD)
resolution 3840 x 2160 pixels. To connect the monitor to the adapter, use a high quality DP cable.
During the additional monitor installation, the screen of the laptop, Mac, tablet or PC can blink, this
is normal state.
Note:
Windows OS: Setting of the MST mode with two connected monitors is always dependent on the
internal graphics card and hardware specifications of the notebook / tablet (must support dual
monitor set-up). To set up two monitors, using of both the Windows control utility and the "Control
panel for the Intel HD Graphics" is required in some hardware combinations (item Display-
Multiple monitors). For the corresponding resolution, we also recommend setting of the same
refresh rate on both connected monitors.
MacOS: Mac OS does not support MST (2 monitors in the extended mode). For the corresponding
resolution for internal graphics card, we recommend to select "Default for Monitor", set resolution
on the second external monitor and restart your Mac device.
EN
05