General Aspects; For Your Information; Appropriate Use - Hazet 2152-5 Betriebsanleitung

This paragraph gives an overview about all
important security advices which help to
ensure the optimal protection of the personnel
as well as the safe and trouble-free operation of
the testing device.
Additionally, the different chapters contain con-
crete security advices that are marked with
symbols in order to avert immediate danger.

1. General Aspects

• The testing device was developed and fabri-
cated according to the technical norms and
standards that have been valid at that time
and is considered to be operationally re li-
able. Nevertheless, the device can present
a danger when it is not used as intended
or in an inappropriate way by non-qualified
personnel. Please take care that any person
using the device or carrying out mainte-
nance work carefully reads these operating
instructions and understands all information
given in there, before the first use.
• Any modification of the testing device is
strictly forbidden.
2. Operator's Liabilitiy
• Keep the operating instructions always
together with the testing device.
• The testing device must only be used if
it is technically faultless and operationally
reliable.
• All security devices must always be within
reach and should be checked regularly.
• Apart from the safety advices given in these
operating instructions, the user of this tool
has to observe and respect the safety reg-
ulations, regulations for the prevention of
accidents and regulations for environmental
protection being valid for the application
area of this device, too.
1 For Your Information
Nicht an Motorsteuergeräten verwenden! Do not use on electronic control units!

3. Appropriate Use

Operational safety can only be guaranteed,
if the device is used as intended and in
compliance with the indications given in the
operating instructions. Apart from the safety
advices given in these operating instructions,
the general safety regulations, regulations for
the prevention of accidents and regulations
for environmental protection being valid for the
application area of this testing device have to
be observed and respected, too.
The testing device has to be used, inspected
and main tained always in compliance with
the respective local, state, national or federal
regulations.
• The electrical multifunctional testing device
with LED and integrated lighting is intended
for testing electrical components.
• Any deviation from the intended use and/or
misapplication of the testing device is not
allowed and will be considered as improper
use.
• Any claims against the manufacturer and/
or its authorized agents because of damage
caused by improper use of the device are
excluded.
• Any personal injury or material losses caused
by the improper use are the sole responsibil-
ity of the operator and user.
19 19