Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before the first use
Remove all packaging material as carton and foils.
•
Unroll the cord completely.
•
Clean the stainless steel surface with a slightly damp cloth and dry
•
thoroughly.
If necessary cook some water, empty and rinse the water kettle afterwards to
•
remove production residues that might be inside. Always take care not to let
water run into the electric parts of the unit.
Place the unit on a stable, dry non-slip and heat resistant surface.
•
Connect the appliance to the current. Fill in approx. 0.5 io 1.0 l of water.
•
Close the lid properly. Turn the switch ON. The control lamp is illuminated.
Switch off after this process, and unplug.
•
Open the lid and let the unit cool down. Empty the water kettle.
•
Wipe the surface with a slightly damp cloth to remove stain due to water
•
spotting.
H
o
w
t
o
u
s
e
t
h
e
w
H
o
w
t
o
u
s
e
t
h
e
w
Caution! Danger of burning! The appliance gets very hot during operation.
During operation of electrical caloric appliances, high temperatures – by
boiling water, hot steam or hot body – are generated, which may cause
injuries. Never open the lid while the unit is in operation! Only touch the
cool touch handle to open or close! Never touch hot lid or housing! Caution!
Always keep enough distance to heat or steam sensitive surface, walls,
furniture. Ensure that the cord does not touch hot parts of the appliance like
lid or housing.
In order to fill in water, always lift off the reservoir from the base station.
•
Open the cap and fill the reservoir with cold water. The quantity of water has
•
to be between MIN and MAX (see water level scale) – don't exceed or under-
run the indicators.
Close the cap carefully until it is locked. The automatic switch-off can work
•
only with a properly closed cap.
Put the kettle on the base station and switch-on the appliance by switching
•
the ON/OFF switch to I. The control lamp is illuminated.
The boil process can be interrupted at any time by positioning the switch to
•
OFF(down).
The kettle switches off automatically some seconds after the water has boiled.
•
If you want to reboil the water, it is necessary to let the water cool down some
minutes before the appliance can be switched on again.
In order to open the lid, press the unlocking button. In order to prevent scald
•
injuries, pay attention that neither hot water nor hot steam can escape.
Note: The appliance has an integrated lime filter. Please ensure that the lime
•
filter has been fixed properly inside before use. (To assemble the lime filter
see chapter decalcification).
The appliance is equipped with a safety system and will automatically switch off,
•
should the kettle be accidentally operated without or with not enough water.
a
t
e
r
k
e
t
t
l
e
a
t
e
r
k
e
t
t
l
e
11
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
