Numan Unison Benutzerhandbuch Seite 105

BT MODE
Prior to pairing, verify your device supports BT 4.0+EDR A2DP and your device is not connected to any other
BT product. Devices may pair differently. Below is a general guide.
1. Press to source to BT mode. This will power on the BT. Turn the volume up about ¼ to start. Also turn up
the volume on the source device (the device you are streaming from).
2. Turn on the BT on your enabled device.
3. Select BT device name "NUMAN Unison" when it appears on your device's screen to Initiate searching.
4. You can start to play your music files wirelessly. Adjust the volume level on your device.
You should not have to pair your device again.
105