Hama EP2 Bedienungsanleitung Seite 9

8. On/Off Switch
To switch the presenter off, switch the selection button to "Power-Off"
Note:
Youmust reactivate the connection after switching on the device Press the touchpad to do this. This executes the cursor function.
Note that you can reactivate this connection only if the presenter was already connected toa aptop or PC
(as described under point 4, "Connecting (Pairing)")
9. Functionality Problems
If the presenter does not function as is expected, make sure you have carried out the following steps correctly.
- The battery has been charged (after placing the presenter in the ExpressCard slot, the LEDshould no longer be red)
The Bluetooth device was successfully installed
- The receiver and device are within their communicationrange (dependingon ocation, max.10m)
Additional Notes:
We suggest that you remove the presenter from the ExpressCard card slot if the aptop is to remain switched off for a long
period of time.
(Fig. 2).
9