Wilfa ec FLOW STREAM Anleitung Seite 4

EN
Button overview
On/Off – Press to turn the
hair straightener on or off.
Heat plate control button
– Press to adjust the tem-
perature on the heat plates.
Temperature range: 100°C to
230°C. Press and hold to turn
the heat plates on or off.
Airflow speed button – Press
to adjust airflow speed. Press
and hold to turn it on or off.
Airflow temperature – Press
to adjust airflow temperature.
Cycles through cool, warm
and hot settings.
USE
Hair type
Fine, damaged,
bleached hair
Normal,
healthy hair
Coarse, thick
hair
• Insert the power plug
• Slide the lock switch downwards to
open the hair straightener.
• Press the on/off button to turn the
appliance on.
• Use the buttons to select the de-
sired functions and adjust them to
your preference.
• When using heat plates to straight-
INSTRUCTION MANUAL
Temperature
Heat plate Airflow
100-160°C Warm
160-200°C Warm
200-230°C Hot
4
en your hair, ensure your hair is
completely dry and tangle-free
before straightening.
• When styling towel-dried hair,
use the airflow function. Adjust
the temperature and speed to
your preference. The airflow starts
automatically when you close the
clamps to straighten.
• Use cold airflow to set your style.
Standby mode
When using only the airflow function,
press and hold the airflow speed but-
ton to put the appliance into standby
mode.
If no action is taken after turning the
appliance on, it will enter standby
mode after 20 seconds.
Auto shut off
For safety reasons, the hair straight-
ener automatically switches off after
20 minutes. To continue using it, press
the on/off button to switch it back on.
CLEANING AND
MAINTENANCE
• Ensure the appliance is complete-
ly cool before touching the heat
plates.
• Use a soft cloth to wipe the heat
plates and the outside of the appli-
ance.
• Do not wind the cord around the
appliance.
• Store it in the included travel bag.
Filter
• The filter cap is magnetically at-
tached.
• Gently pull down the filter cap to