Seite 1
Assembly Instructions 取扱説明書 Shoe Cabinet Model No. HOGA-RY0432 シューズキャビネット...
Seite 2
EN - Contact us. We're here to help you. FR - Contactez-nous. ous vous aiderons. IT - Contattateci. Siamo qui per aiutarvi. DE - Rufen Sie uns an. Wir sind hier, um zu helfen. JP - ES - Contáctanos, estamos aquí para ayudarte. お問い合わせ。お気軽にご相談ください。...
Seite 3
Warm Tips 1. Carefully read and keep these instructions for later. 2. Before assembling, ensure all parts and accessories are there. 3. Assemble on a soft, smooth surface like a carpet to avoid scratches. 4. Don't fully tighten the screws until everything is correctly in place. 1.
Seite 4
EN - We recommend using hand tools for assembly. If an electric screwdriver is used, reduce its power to protect the product. DE - Wir empfehlen die Verwendung von Handwerkzeugen für die Montage. Wenn ein elektrischer Schraubendreher verwendet wird, reduzieren Sie die Leistung, um das Produkt zu schützen. IT - Per l'assemblaggio si consiglia di utilizzare utensili manuali.
Seite 5
Caution - Check all parts. Most board parts are labeled on the edge. Contact us for a free replacement if any are damaged or missing. - Bitte überprüfen Sie alle Teile. Die meisten Platinenteile sind am Rand beschriftet. Bitte kontaktieren Sie uns für einen kostenlosen Ersatz, falls etwas fehlt oder beschädigt ist. - Controllare tutte le parti.
Seite 6
EN - Parts List - DE - Teileliste - IT - Elenco parti - FR - Les Pièces - ES - Lista de Piezas - JP - パーツリスト 1 pc 1 pc 1 pc 1 pc 1 pc 4 pcs 1 pc 1 pc 4 pcs...
Seite 7
EN - Hardware List - DE - Hardwareliste - IT - Hardware Elenco - FR - Le Matériel - ES - Lista de Hardware JP - フィッディングパーツリスト Φ 15x12 mm Φ 3x18mm 5x7 mm 24 pcs 8 pcs 1 pc 2 pcs 28 pcs P-06...
Seite 8
EN - Install Plastic Insert and Connector Bolt Step 1-2: Align the plastic insert with the mounting hole and press/tap it in until fully flush with the surface. If unable to press it in, loosen the bolt counterclockwise or completely remove the bolt from the plastic insert, then retry. Step 3-4: After the plastic insert is pressed into place, tighten the bolt clockwise with a screwdriver until the metal threads are fully concealed.
Seite 9
EN - Lock the Eccentric Cam Step 1-2: Ensure the connector bolt is fully seated in the hole. Align the cam arrow with the bolt centerline. Step 3: Rotate the cam head clockwise with a manual screwdriver until fully locked. Please do not use power tools – overtightening may strip components.
Seite 20
Φ 4 pcs 8 pcs 2 pcs 4 pcs Side panel Door EN - To prevent the door hinge from falling off,please install 4 screws. DE - Damit das Türscharnier nicht abfällt, montieren Sie bitte 4 Schrauben. 16 pcs IT - Per evitare che la cerniera della porta cada, installare 4 viti.
Seite 21
EN - Open the door. DE - Öffnen Sie die Tür. IT - Aprire la porta. FR - Ouvrez la porte. ES - Abre la puerta. JP - ドアを開けてください。 EN- Top panel DE - Oberkante IT - Pannello superiore FR - Panneau supérieur ES - Panel superior DE - Um Ihre Türen Anzupassen Und Die Abstände GleichmäfBiger Zu Gestalten (Optional).
Seite 22
EN - Step 3b: Move Door Right EN - Step 3a: Move Door Left DE - Schritt 3a: Tür Nach Links Verschieben DE - Schritt 3b: Tür Nach Rechts Verschieben IT- Fase 3a: Spostare La Porta A Sinistra IT - Fase 3b: Spostare La Porta A Destra FR - Étape 3a: Déplacer La Porte Vers La Gauche FR - Etape 3b: Déplacer La Porte Vers La Droite ES - Paso 3a: Mover La Puerta Hacia Izquierda...
Seite 23
EN - Wall M4×35 mm DE - Wand 2 pcs 2 pcs IT - Muro FR - Mur ES - Pared JP - 壁 M4×12 mm 4 pcs 2 pcs 2 pcs Wall P-22...