General Notes - WimTec SanTec OCEAN U8 Montage- Und Bedienungsanleitung

EN

General notes

10 Urinal control
OCEAN U8
Congratulations on purchasing your urinal control
SanTec OCEAN.
In order that you will be satisfied with this high-valued ar-
mature for long years, we recommend considering following
points for cleaning and maintenance:
Only use gentle cleaning supplies based on soap.
Don´t use acidic cleaning supplies or disinfectant, which
scrape or rub.
Only clean by using soft sponge or cloth.
Don´t use steam stream equipment.
These instructions are valid for the following products:
SanTec OCEAN U8 230 V
Glass white
Glass white/chromium
Black
Black/chromium
Scope of supply:
Safety glass-front plate with frame, mounting frame with integ-
rated electronics, power supply, magnetic valve and
fixing material.
Important installation hints:
Mounting and installation must be performed by licensed
craftsmen to DIN 1988, OVE/ONOERM E8001 as well as VDE
0100 part 701.
Make the feeder by a 2-pin main switch with minimum 3 mm
connection opening and protect with maximum 6 A!
When planning and installing sanitary systems, the relevant
local, national and international standards and regulations must
be complied with!
The "general installation conditions" at www.wimtec.com are
valid.
SanTec OCEAN U8
Art.No. 109 863
Art.No 109 856
Art.No. 109 870
Art.No. 115 584