Product Features; Main Parts - Chipolino Rider Bedienungsanleitung

EN
• Use away from rivers, pools, stairs or obstacles!
• DO NOTmake any changes or modifications to the construction of the SCOOTER! If
necessary, contact the dealer or an authorised service centre for consultation and repair.
• DO NOTuse spare parts and other components that are not supplied by the manufacturer!
The manufacturer is not responsible for safety if spare parts other than the original ones for
the approved type or recommended by him are used.
• Keep plastic packaging away from children to avoid the risk of suffocation!
This product is suitable for users over 8 years of age and with a maximum weight of 100 kg. (Class
A.)
FOLLOW THE INSTRUCTIONS AND SEQUENCE FOR ASSEMBLY AND USE OF THE PRODUCT AS
DESCRIBED IN THE TEXT AND ILLUSTRATIONS IN THE INSTRUCTIONS.
WARNING! CHECK THE SECURITY OF THE FASTENING AFTER COMPLETING EACH OPERATION!
WARNING! THE TOY MUST BE USED WITH EXTRA CARE, AS IT REQUIRES BALANCING SKILLS.
THIS WILL PREVENT FALLS OR COLLISIONS THAT COULD CAUSE INJURY TO THE CHILD AND
OTHER PERSONS.

MAIN PARTS

1 – Handlebar; 2 – Steering wheel; 3 – Height adjustment clamp; 4 - Handlebar tube; 5 - Folding
mechanism; 6 - Front wheel; 7 – Base; 8 – Rear wheel brake; 9 – Handlebar brake; 10 - Footrest.
1. UNFOLDING/FOLDING THE SCOOTER
Unfolding: Press the folding/unfolding button and turn the handlebar upwards until it locks into
a vertical position and you hear a „click".
Folding: Press the folding/unfolding button and move the handlebars down until the scooter
folds and you hear a „click" sound.
2. INSTALLING THE HANDLEBARS
Place the handles on both sides of the handlebar (a). Press each handle (b) until the pin appears
through the hole and you hear a locking sound. Cover the pins with the protective cap (c).
IMPORTANT! Make sure that the handles are securely fastened!
3. ADJUSTING THE HANDLEBAR HEIGHT
To adjust the handlebar, loosen the handlebar locking mechanism (3). Press pin A and move the
handlebar up or down to the desired height until you hear a click and the pin engages in the
corresponding hole.
Tighten the handlebar locking mechanism.
ATTENTION! WARNINGS!

PRODUCT FEATURES

ASSEMBLY INSTRUCTIONS