Using The Brakes; Instructions For Safe Use - Chipolino Rider Bedienungsanleitung

EN

4. USING THE BRAKES

Rear wheel brake- When you want to slow down or stop, slide one foot back and gradually press the brake.
Note: While pressing the brake, you must hold the handlebars with both hands.
Handlebar brake- To slow down or stop, gently squeeze the brake lever with your whole hand.
CAUTION: Avoid pressing the lever sharply to prevent the wheels from locking.
ATTENTION! CHECK THE SECURITY OF THE FASTENING AFTER COMPLETING EACH OPERATION!
WARNING! THIS PRODUCT MUST BE USED WITH EXTRA CAUTION AS IT REQUIRES BALANCING
SKILLS. THIS WILL PREVENT FALLS OR COLLISIONS THAT COULD CAUSE INJURY TO BOTH THE
RIDER AND OTHER PERSONS.
When using the scooter for the first time, start on the spot without other traffic participants or learn with the
guidance and assistance of another person.
CAUTION! SUDDEN MOVEMENTS OR TWISTING OF THE BODY MAY LEAD TO LOSS OF BALANCE AND CONTROL
OVER THE SCOOTER!
IMPORTANT! Before you start riding the scooter, learn how to balance on it!
• Grasp the handles with both hands, place one foot on the base and the other on the ground.
• Look around carefully and make sure that the area around you (where you will be riding the scooter) is
free of people and objects.
• Push off with one foot to start the scooter moving.
• Repeat the above action (pushing off with your foot) to keep moving.
• Turn the handlebars to the left or right to make a left or right turn.
• To stop or slow down, gradually press the brake above the rear wheel with the heel of one foot or place
the foot you are pushing off with on the ground.
IMPORTANT! If you lean too far to the left or right, you may tip the scooter over and fall!
IMPORTANT! The brake heats up during use! Do not touch the brake and rear wheel immediately after braking!
IMPORTANT! Teach your child how to ride the scooter and make sure they have mastered the controls before
letting them ride!
• Periodically check the condition of the individual parts.
• Do not pour liquids on the product. Clean with a soft cloth dampened with water or a neutral liquid
detergent.
• Do not clean with aggressive detergents containing abrasive particles, ammonia, bleach or alcohol.
• Lubricate the rotating parts regularly.
• Do not use on sandy terrain.
• Store the product in a clean and dry place. Do not expose to direct environmental influences such as sun,
rain, moisture or sudden temperature changes!
• Always dry the product thoroughly before storing it or using it again. Mould may form if the product is
stored in a damp environment.
• If you encounter any problems related to normal use, please contact an authorised service center for
advice or repair.

INSTRUCTIONS FOR SAFE USE

PREVENTION AND MAINTENANCE INSTRUCTIONS