Language Settings - Fanvil V66 Pro Bedienungsanleitung

Device installation
Please follow the instructions
• Desk Mount Method
• Wall Mount Method
• Connecting to the device
Please connect power adapter, network, PC, handset,
and headset to the corresponding
below picture
(j) Power port: connect the power adapter
@ Network port: connect local area network or Internet
@ PC port: the network port connect to the computer.
@ Headset port: connect headset
(b)Handset port: connect IP Phone handset.
• DC12V Internet
Note: You can contact your service provider for additional settings that may be necessary to configure the phone, or download the user
manual and FAQ for more detailed
in be ow picture to install the device.
ports as described in
Heads
information.
Network connect
using Ethernet
1 The power on the device and connect the WAN port Of the
phone to the RJ45 socket of a hub/switch
(LAN side of the router) using the Ethernet cable.
2 The default is DHCP mode
using Wi-Fi
1_The power on the device and make sure the phone is idle
2. Press Menu > Basic > WI-AN, Enab ed the Wi Fi Feature
3. Press scan to search for currently available wireless network
4. Enter the available network and select the Wi Fi you want to
connect
5. Press connect soft key and enter the appropriate
connect to the Wi-Fi The default
Phone configuration
Configuration via LCD menu Of phone
1. Press Menu > Advanced
2 Select Network: To configure the Network Settings
(IPv4/lPv6/ Pv4&IPv6, DHCP/Static IP/PPPoE)
3. Select Accounts: To configure enable the account, fill the SIP
Server address, port, Auth User, Auth_password
4 Save the configuration
Configuration via web
1 Get the IPaddressfrom the phone:Press@ downkey,or
Menu > Status > ETH IPlWi-Fi 'P;
2 Login: Input the IP address in the web browser The PC and
phone should be in the same IP address
username and password are both 'admin') ;
3 Configure: Select network/account etc, and fill the relevant
content ;
4 Save the configuration
Language settings
1 press Menu > Basic > Language
2 Select the desired language and press 0K soft key
Wireless handset
Turn on/Off/Connect wireless
1 Power on: Press and hold the dial key for 3s or place the handset
in the handset cradle
2_Power Off: press and hold the dial key for 5s
3. Connection: Place the wireless
quickly connect
Checking wireless handset status:
1.With the wireless handset connected,
2. Use the left or right navigation key to select 'Wireless handset" to
view its status
Searching for wireless handset:
1. With the wireless handset connected,
2. Use the eft or right navigation key to select "wireless handset"
3. Press the search item, the wireless handset light will flash and emit
an alarm sound.
4 Click "0K" to locate the wireless handset; the pop-up and the
ringing will stop
Switch the usage mode of the handset:
1 By default, the wireless handset is used preferentially If you need
to use a wired handset, please disconnect
2. Press Menu > Basic > Wireless
only use a wired handset
-3
or a router
password to
is DHCP mode
(default password 123)
etc
segment (The default
handset:
handset in the handset
press the Menu > Status.
press the Menu > Status.
the wireless connection first
Handset and select Disabled
cradle to
to