Fanvil V66 Pro Bedienungsanleitung Seite 18

1_This equipment complies with Part 68 ofthe FCC rules and the requirements adopted by the ACTA On the bottom of this equipment is a label
that contains, among other information, a product identifier in the format LIS: 311IPNANV66PRO If requested, this number must be provided to the
telephone company
2. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product It is designed to be
connected to a compatible modular jack that is also compliant See installation instructions for details
3. Ifthis equipment [US: 3111PNANV66PROl causes harm to the telephone network, the telephone company will notify you in advance that
temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon
as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary
4. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the
equipment If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain
uninterrupted service.
5. Iftrouble is experienced with this equipment (US: 311 IPNANV66PRO], for repair or warranty information, Service can be facilitated through our
office at:
U S Agent Company name: EMCTEK
Address: 11788 Big Canyon Ln, San DiegoCA 92131 USA
Tel: +1 858 401 9073
Fax: N/A
If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the
problem is resolved
6. Please follow instructions for repairing if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of device except
specified. For repair procedures, follow the instructions outlined under the limited warranty
7_Connection to party line service is subject to state tariffs Contact the state public utility commission, public service commission or corporation
commission for information
8 If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this does not disable your alarm
equipment If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer
9 Ifthe telephone company requests information on what equipment is connected to their lines, inform them of:
a) The ringer equivalence number (NAN]
b) The USOC jack required [N/A]
c) Facility Interface Codes ("FIC") [N/A]]
d) Service Order Codes ("SOC") (N/A)
e) The FCC Registration Number [US: 3111PNANV66PROl
10 The REN is used to determine the number of devices that may be connected toa telephone line Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call In most but not all areas, the sum of RENs should not exceed five (5 0) To be
certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company The REN
for this product is part of the product identifier that has the format US: 311IPNANV66PRO The digits represented by## are the REN without a
decimal point
For this product the FCC Registration number is [US: 311IPNANV66PRO] indicates the REN would be NAN
11 We suggest the customers use a surge arrestor to protect the device
This device meets HAC and CS03
"This device meets the applicable Innovation, Science and Economic Development Canada technical specifications I Ce produit répond
innovation, des sciences et de Développement économique Canada spécifications techniques applicables "
Any Changes or modifications not expressly approved by the party responsible for compliance cou d void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the fol owing two conditions: (1) This device may not cause harmfu
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the fol owing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different
—Consult the dealer or an experienced radio/TV technician for help
This device complies with Innovation, Science, and Economic Development Canad licence exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device
Le présent apparei est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de icence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioé ectrique subi, méme si le brouillage est susceptible d'en compromettre le
fonctionnement.
5GHz band (W52): Indoor use only
Bande 5 GHz (W52): utilisation intérieure uniquement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe a est conforme
The device has been tested and comply with FCC/ISED SAR limits.
L'Unité a été testée et répond
Part V
la norme NMa-003 du Canada
aux limites FCC/ISED SAR.
from that to which the receiver is connected
la