Omnitronic MES-12BT2 Bedienungsanleitung Seite 23

Level control
To mix the microphone signals to the master
signal.
Microphone input
6.3 mm jacks for connecting microphones.
Level control
To mix the line signal to the master signal.
Intensity control
Adjusts the intensity of the internal reverb
effect applied to inputs MIC 1 and MIC 2 and
the wireless microphones.
Level control
To mix the audio player signal to the master
signal.
Master control for the overall level
Clip indicator
Power indicator
Line input
Stereo input (RCA L/R) for connecting audio
units with line level (e.g. CD player).
Master outputs
RCA jacks to feed the mixed signal (mono)
to units with line level inputs, e.g. another
PA system.
Tone control
Graphical 5-band equalizer for the master
signal.
Receiver module
Level controls
To mix the wireless microphone signals to
the master signal. The LEDs light when a
radio signal is received.
Receiver module on/off
12V BACKUP INPUT terminals
For alternative power supply from a 12 V
source.
Battery indicators
If only the red indicator lights up, the rech.
battery should be charged.
Antenna inputs
Rech. battery fuse
Power on/off
Power input
Mains fuse
Audio Player and Remote Control
LCD
Memory card slot
USB port
Infrared sensor for the remote control
Operating buttons
• [MODE]: For switching between the data
carriers USB and SD and Bluetooth
operation.
• [►II]: For switching between play and
pause.
• [ ]: Stops the playback.
• [ ]: For selecting random play (RAN) and
repeat functions (FOLD, RALL and RONE).
• [ ] and [ ]: For title selection (short
actuation) and fast forward/reverse (long
actuation).
[ ]
For switching the audio player on/off.
[ ]
For muting the audio player.
[EQ]
For selecting equalizer settings.
[ ] and [
For basic volume adjustment of the audio
player.
[0-9]
Numerical keys for direct selection of a title.
23
]