Function - Alpha IP BDT 24001 Bedienungsanleitung

Alpha IP BDT 24001

Function

3 Function
The Alpha IP Dimming Actuator for brand switches is suitable for instal-
lation in a flush-type box. Once installed, it switches and dims connect-
ed lights and lamps.
The dimming actuator for brand switches allows a comfortable control
of connected consumers via the rocker button or via the Alpha IP app.
When the rocker button is pressed shortly, the dimming actuator will
switch the consumer on or off. When the rocker is used, the brightness
of a lamp or a light is dimmed correspondingly.
The adaptors for different switch series allow a cost-saving exchange of
switches made by popular manufacturers against an intelligent Alpha IP
installation. Installation efforts are kept to a minimum because compo-
nents of the already existing or scheduled switch series and cables can
be used. The design resp. the colours and surfaces of already installed
switch series remains unchanged, because existing frames and rockers
can be continued to be used.
Communication with other components is performed via the Homematic
(HmIP) radio protocol. Radio transmission is realised on a non-exclusive
transmission path; thus, interference cannot be completely excluded.
Interference can be caused e. g. by switching processes, electric motors
or defective electric appliances.
The range inside buildings can be strongly different from the range in
open air.
23 DEU ENG