1 Zu dieser Anleitung Gültigkeit, Aufbewahrung und Weitergabe der Anleitung Diese Anleitung gilt für den Alpha IP Dimmaktor für Markenschalter (BDT 24001). Sie enthält Informationen, die für die Inbetriebnahme und Be- dienung notwendig sind. Bevor mit dem Gerät gearbeitet wird, ist diese Anleitung vollständig und gründlich zu lesen.
Berufsbezeichnungen sowie den vergleichbaren Berufsab- schlüssen im europäischen Gemeinschaftsrecht. Bestimmungsgemäße Verwendung Der Alpha IP Dimmaktor für Markenschalter (BDT 24001) ist eine System- komponente des Alpha IP Systems und dient • der ortsfesten Installation in wohnungsähnlichen Umgebungen, • der Schaltung und dem Dimmen von Lastenlampen: Glühlampen,...
Alpha IP BDT 24001 Sicherheit Sicherheitshinweise Zur Vermeidung von Unfällen mit Personen- und Sachschäden sind alle Sicherheitshinweise in dieser Anleitung zu beachten. Für Personen- und Sachschäden, die durch unsachgemäße Handhabung oder Nichtbeach- ten der Gefahrenhinweise verursacht werden, wird keine Haftung über- nommen.
Alpha IP BDT 24001 Funktion 3 Funktion Der Alpha IP Dimmaktor für Markenschalter eignet sich für die Montage in einer Unterputzdose. Einmal installiert dimmt und schaltet er ange- schlossene Lampen und Leuchten ein bzw. aus. Der Dimmaktor für Markenschalter ermöglicht eine komfortable Steue- rung angeschlossener Verbraucher über die Tasterwippe oder über die...
Alpha IP BDT 24001 Geräteübersicht 4 Geräteübersicht (vgl. Abb. links) Systemtaste Anschlussklemme für Neutralleiter (N) Anschlussklemme für Phase (L) Anschlussklemme für gedimmte Phase ( ) Technische Daten Geräte-Kurzbezeichnung BDT 24001 Versorgungsspannung 230 V / 50 Hz max. Stromaufnahme 0,35 A...
Seite 8
Alpha IP BDT 24001 Geräteübersicht Typ. Funkreichweite 270 m (Freifeld) Duty Cycle < 1 % pro h/< 10 % pro h 2014/53/EU Funkanlagen Richtlinien 2014/30/EU EMV 2011/65/EU RoHs...
Alpha IP BDT 24001 Adapter für Markenschalter 5 Adapter für Markenschalter Nachfolgende Wippadapter sind als mögliches Zubehör erhältlich, um eine Kompatibilität mit möglichst vielen Herstellern zu erreichen und eine Integration in den verschiedenen Designs zu erleichtern. Ggf. kann die Anpassung der Wipphalterung oder der Rahmen der Hersteller durch Sägen oder Feilen erforderlich sein.
Seite 10
Alpha IP BDT 24001 Adapter für Markenschalter Berker (B2) Modul 2 Busch-Jaeger (BJ) Duro 2000® SI/SI Linear Reflex SI/SI Linear carat® future® linear solo® Busch® axcent, alpha Jung (J1)*) LS 990 LS design LS plus CD 500 CD universal CD plus...
Seite 11
Alpha IP BDT 24001 Adapter für Markenschalter Kopp (K)*) **) Alaska Athenis Ambiente Europa Paris (Objekt HK 05) Milano Rivo Gira (GD) Standard Gira 55 (G) System 55 Standard 55 Event Espirit düwi / Popp (D)**) Architaste Arcada Trend Standard Quadro (Plus2000)
Alpha IP BDT 24001 Inbetriebnahme 6 Inbetriebnahme Montage WARNUNG Lebensgefahr durch anliegende elektrische Spannung! ¾ Das Montieren und Anschließen des Gerätes ist nur von einer autori- sierten Fachkraft zulässig. ¾ Vor der Montage und Installation die Netzspannung ausschalten und gegen Wiedereinschalten sichern.
Gerät anlernen Vor Funktionsfähigkeit des Dimmaktor für Markenschalter muss die In- tegration in das Alpha IP System über den Access Point (HAP 21001) er- folgen. Dazu wird das Gerät wie folgt angelernt. Ö Der Alpha IP Access Point ist über die Alpha IP App eingerichtet.
QR-Code Scannen. Die Gerätenummer befindet sich auf dem Gerät. Nach einem erfolgreichen Anlernvorgang leuchtet die LED grün. Leuch- tet die LED rot, den Vorgang wiederholen. 5. Den Anweisungen in der Alpha IP App folgen. 7 Bedienung Nach dem Anlernen und der Montage des Gerätes erfolgt die Konfigu-...
Alpha IP BDT 24001 Anzeigen 8 Anzeigen Die LED der Systemtaste des Gerätes signalisiert durch Leucht- und Blink- muster den Gerätestatus. Statusanzeigen Anzeige Bedeutung Bedeutung Langes, grünes Leuch- Vorgang bestätigt • Bestätigung vorge- nommener Einstel- lung/Übertragung. 1 x oranges, 1 x Testanzeige •...
Durch Herstellen der Werkseinstellungen gehen alle vorgenommenen Einstellungen verloren. 1. Das Gerät aus der Alpha IP App löschen. 2. Ggf. die Wippe entfernen. 3. Die Systemtaste für 4 Sekunden drücken, bis die LED schnell orange blinkt (vgl. Abb. links).
Fachkraft zulässig. ¾ Vor der Außerbetriebnahme Netzspannung ausschalten und gegen Wiedereinschalten sichern 1. Das Gerät aus der Alpha IP App löschen. 2. Netzspannung ausschalten und gegen Wiedereinschalten sichern. 3. Alle bestehenden Kabel lösen. 4. Das Gerät demontieren und ordnungsgemäß entsorgen.
Seite 18
Alpha IP BDT 24001 Alpha IP BDT 24001 Instruction manual 133422.1651...
Seite 19
Alpha IP BDT 24001 Contents About these instructions ........ 20 Validity, storage and forwarding of the instructions Symbols Safety ............. 21 Personnel-related preconditions Intended use Safety notes Function ............23 Device overview ..........24 Technical Data Adapters for brand switches ......26 Commissioning ..........
1 About these instructions Validity, storage and forwarding of the instruc- tions These instructions apply to the Alpha IP Dimming Actuator for brand switches (BDT 24001). These instructions include information necessary for commissioning and operating. These instructions must the read com- pletely and thoroughly before commencing any work with the device.
Republic of Germany, as well as according to comparable professions within the European Community Law. Intended use The Alpha IP Dimming Actuator for brand switches (BDT 24001) is a component of the Alpha IP System and serves • for a fixed installation in environments of residential use, •...
Seite 22
Alpha IP BDT 24001 Safety • Only an authorised electrician may install, connect and open the de- vice. • Only use the device if it is in flawless state. • Observe the performance limits of the device and its environmental conditions.
The dimming actuator for brand switches allows a comfortable control of connected consumers via the rocker button or via the Alpha IP app. When the rocker button is pressed shortly, the dimming actuator will switch the consumer on or off. When the rocker is used, the brightness of a lamp or a light is dimmed correspondingly.
Alpha IP BDT 24001 Device overview 4 Device overview (see figure on the left) System key Connection terminal for neutral conductor (N) Connection terminal for phase (L) Connection terminal for dimmed phase ( ) Technical Data Short designation of the...
Seite 25
Alpha IP BDT 24001 Device overview Typical radio range 270 m (in open air) Duty cycle < 1 % per h/< 10 % per h 2014/53/EU Radio installations Guidelines 2014/30/EU EMC 2011/65/EU RoHs...
Alpha IP BDT 24001 Adapters for brand switches 5 Adapters for brand switches The following rocker adapters are available as possible accessories in or- der to achieve compatibility to as many manufacturers as possible and to facilitate integration into the most different designs. If necessary, the rocker support or the frame of the manufacturer can be adapted by sawing or filing.
Seite 27
Alpha IP BDT 24001 Adapters for brand switches Berker (B2) Module 2 Busch-Jaeger (BJ) Duro 2000® SI/SI Linear Reflex SI/SI Linear carat® future® linear solo® Busch® axcent, alpha Jung (J1)*) LS 990 LS design LS plus CD 500 CD universal...
Seite 28
Alpha IP BDT 24001 Adapters for brand switches Kopp (K)*) **) Alaska Athenis Ambiente Europa Paris (Objekt HK 05) Milano Rivo Gira (GD) Standard Gira 55 (G) System 55 Standard 55 Event Espirit düwi / Popp (D)**) Architaste Arcada Trend...
Alpha IP BDT 24001 Commissioning 6 Commissioning Installation WARNING Electrical voltage! Danger to life! ¾ Only an authorised electrician may install and connect the device. ¾ Always disconnect from the mains network and secure against unin- tended activation before mounting and installation.
Alpha IP system via the Access Point (HAP 21001). For this, teach-in the respective device as follows. Ö The Alpha IP Access Point has been set up via the Alpha IP app. Ö The actuator is assembled and installed.
The LED will light up in green after a successful teach-in process. The process must be repeated if the LED lights up in red. 5. Follow the directions of the Alpha IP app. 7 Operation After the teaching-in and the installation of the device, the configuration...
Alpha IP BDT 24001 Displays 8 Displays The LED of the device signalises the device status by means of light and flashing patterns. Status displays Display Meaning Meaning Long lighting in Process confirmed • Confirmation of per- green formed setting/trans- mission.
10 Resetting factory settings All settings will be lost when the factory settings are restored. 1. Delete the device from the Alpha IP app. 2. Remove the rocker if necessary. 3. Press the system key for 4 seconds until the LED flashes rapidly in orange (see figure on the left).
¾ Only an authorised electrician may decommission the device. ¾ Prior to decommissioning, disconnect from the mains voltage and se- cure against unintended activation. 1. Delete the device from the Alpha IP app. 2. Disconnect from the mains network and secure against unintended activation.