Using Pc, Etc - Technics STC700DE Bedienungsanleitung

Using PC, etc.

You can connect the digital audio input terminal [PC] and a
PC, etc. with a USB cable and play back music on the PC,
etc. with this unit.
≥ About supported format, refer to "File format" (
Connecting to a PC
Before connecting to a PC, follow the steps below.
≥ Refer to the following for the recommend OS versions for your
PC:
– Windows 7, Windows 8, Windows 8.1, Windows 10
– OS X 10.7, 10.8, 10.9, 10.10, 10.11
1 Download and install the dedicated driver to the PC.
(Only for Windows OS)
Download and install the driver from the website below.
www.technics.com/support/
2 Download and install the dedicated app "Technics
Audio Player" (free of charge) on your PC. (Common
to both Windows OS and OS X)
Download and install the app from the website below.
www.technics.com/support/
20
(20)
35)
(as of December 2015)
Listening to audio from a PC,
etc.
1
Disconnect the AC mains lead.
2
Connect this unit and a PC, etc.
e.g.,
This unit
(rear)
PC, etc.
3
Connect the AC mains lead to this unit, and
raise the power switch lever to the [Í/I]
position. ( 10)
4
Press [N INPUT O] below [NWP] repeatedly
to select "PC".
5
Operate the PC, etc. for playback.
Type B
USB 2.0 cable
(not supplied)
Type A
USB