Telefunken DELTA PRO Bedienungsanleitung Seite 6

ENGLISH
Light effects/LED lighting
When the music is paused, the lighting automatically switches to multicoloured breathing mode. As
soon as playback resumes, the lighting switches to multicoloured rhythm mode and pulses in time
with the music.
Switching off the lighting
Press and hold buttons (1) and (2) simultaneously to switch off the LED lighting. The lighting setting is
not saved. The LED lighting is automatically reactivated the next time the device is switched on.
In Bluetooth mode, the lighting can only be switched off when the device is connected to a Bluetooth
device.
Save function
When the device is switched on, the volume, the last selected playback mode and the saved playback
position (track breakpoint) are automatically restored from the memory card. This ensures that the
device continues playback exactly where it left off when it was last switched off.
Bluetooth reset
If you want to prevent the speaker from automatically connecting to the last paired device in order to
pair a new device, press buttons (2) and (3) simultaneously for about 1 second. This will disconnect
the current connection. If you press and hold buttons (2) and (3) for approximately 10 seconds, the list
of paired Bluetooth devices will be cleared. In this case, the speaker will no longer connect
automatically, and the volume will be reset to 50 %.
The reset button (8) performs a hardware reset. In contrast, holding buttons (2) and (3) for
10 seconds performs a software reset, which clears the memory of paired Bluetooth devices and
TWS connections.
Cable operation
In addition to connecting via Bluetooth, you can also use this speaker with the included (or
compatible) 3.5 mm stereo AUX cable. In AUX mode, the buttons on the speaker can still be used to
adjust the volume or mute the speaker. Playback functions such as Play/Pause or skipping tracks,
however, can only be controlled directly on the connected mobile device.
6
User manual TELEFUNKEN DELTA PRO