Custom Settings - Panasonic DMWFL360LE Bedienungsanleitung

Option
MODE (flash mode)
(flash intensity adjustment)
ZOOM (lighting angle)
(LED light)
GN (guide number)
ISO sensitivity
Group
Aperture
Channel

Custom Settings

Customize settings for improved ease of use.
1 Press and hold the [OK] button for more than 2 seceonds.
The flash will enter custom settings mode.
2 Press 3/4 to highlight items.
3 Rotate the dial to change the highlighted item.
4 Press and hold the [OK] button for more than 2 seconds to
end the settings.
Control panel
14
VQT4Q07 (ENG)
Description
P10
P11
P11
Choose whether the LED lights automatically
or manually.
[A]: Lights automatically as required.
[M]: Lights when the LED light button is
None: Does not light.
Adjust flash level.
Adjust ISO sensitivity.
Choose a group for [RC] mode. (P12)
Adjust aperture.
Choose a channel for [RC] mode. (P12)
Option Description
AF assist [A]: Controlled by camera.
lamp [OFF]: Does not light.
[1/1] to [1/16]: Adjust LED brightness.
LED
brightness
[ON]: Flash control display shows slave mode.
Slave
[OFF]: Flash control display does not show
flash
slave mode.
Flash [ON]: Flash cable not used.
cable [OFF]: Flash cable used.
[ ]: Display values for FOUR THIRDS lenses.
Zoom
None: Display 35 mm film camera equivalent
display
values.
pressed.