Troubleshooting - Kranzle SSM 430 Gebrauch Und Wartung

PROBLEM
By pressing the button (45)
" " ithe display does not
turn on.
The brush does not rotate.
Aspirator does not work.
The machine does not dry
well, leaving traces of water
on the floor.

TROUBLESHOOTING

CAUSE
Low battery.
Main fuse blown.
The battery's plug is still lo-
cated in the charger's outlet.
Function card damaged.
Display card damaged.
The touch sensor on the
handle is defective.
Brush motor damaged.
Brush button not pressed.
Function card damaged.
Display card damaged.
Intake motor damaged.
Aspirator button not pressed.
Recovery tank full.
Aspirator off.
Aspiration tube blocked.
Dirty wiper.
Recovery tank full.
Dirty water filter clogged.
Squeegee rubber
worn.
EN-19
SOLUTION
Check that the battery is
charged.
Replace the main 5A or 80A fuse.
Place the plug correctly.
Replace.
Replace.
Replace.
Replace.
Press the relative button.
Replace.
Replace.
Replace.
Press the button.
Empty, wash and clean the
tank and the probes.
Start up the aspirator.
Check and
clean the aspiration tube that
connects the squeegee to
the recovery tank.
Clean the wiper.
Empty the recovery tank.
Clean the filter.
blades Replace or turn over the
squeegee rubber blades.
EN
if necessary