I Add The Router To An Existing - Tenda Rx12 Pro Schnellinstalationsanleitung

Scenario 2: Set up as an add-on node

I Add the router to an existing

-V-Tip s
• Please ensure that the router has never been used. If not, reset it first,
• Currently, RX12 Pro/TX12 Pro can be networked with the same model, Mesh6X,
Mesh12X, RX27 Pro,or TX27 Pro,
1. Place the router in an elevated and open position within 3 meters from your
existing node.
2. Use the power adapter to connect the router to a power source,and wait until
its LED indicator blinks green slowly.
3. Press the WPS button of the router
blinks green fast. Within 2 minutes, press the MESH/WPS button of the node
of the existing network for 3 seconds to negotiate with this router.
When the LED indicator of the router lights solid green, the networking is
successful and the router becomes a secondary node in the network.
II Relocate the router
1. Refer to the following relocation tips to locate the router to a proper position:
• Ensure that the distance between any two nodes is less than 10 meters.
• Keep your nodes away from electronics
microwave ovens, induction cookers, and refrigerators.
• Place the nodes in a high position with few obstacles.
2. Power on the router again till the LED indicator blinks green slowly.
•V•Tip s
Ifthe LED indicator of router keeps blinking green slowly for more than 3 minutes,
relocate the router and move it closer to the primary node.
network
for about 3 seconds. The LED indicator
with strong interference, such as
Original node
oo
3. Observe the LED indicator of the router until the LED indicator
lights one of the following colors:
Solid green Networking succeeds. Excel lent connection
Solid orange Networking succeeds. Fair connection
Solid red Networking succeeds. Poor connection
4. If the router's LED indicator blinks red slowly,relocate it by repeating
the preceding steps to get an optimal connection quality.
Done.
To access the internet with:
- Wired devices: Connect to the LAN ports of your nodes.
- Wireless devices: Connect to your WiFi network using the WiFi
name and password of your existing WiFi network.
Add-on node
quality
quality.
quality.
06