•
The bedside sleeper cannot be used inclined.
•
To prevent a suffocation hazard from entrapment, the bedside sleeper shall be properly secured
to the adult's bed using the attachment system provided.
•
When in bedside sleeper mode, the product is only suitable for use with adult's beds where the
mattress is flush with the frame.
•
There shall never be a gap between the dropside of the bedside sleeper and the mattress of the
adult bed.
•
Check the tightness of the attachment system before each use by pulling the bedside sleeper in
a direction away from adult's bed.
•
DO NOT use the product if there is any gap between the bedside sleeper and the adult's bed.
•
Gaps should not be filled with pillows, blankets or other items.
•
DO NOT use product if any parts are missing, damaged, or broken. Contact Cosatto for
replacement parts and instructional literature if needed. DO NOT substitute parts.
Visual language key:
Part list:
P1: Crib
P2: Attachment strap (x2)
P3: Mosquito net
Replacement parts:
The replacement parts shown below are available for your product. For UK & Ireland customers, order
through our website: http://www.cosatto.com/service-centre/spares
For customer outside UK & Ireland, contact information for your local distributor can be found on
http://www.cosatto.com/stockists
If you require any further assistance, please contact us at cuddle@cosatto.com
S1: Chassis
S2: Crib section fabric
S3: Basket
S4: Attachment strap (set)
P4:
Mattress
P5:
Carrying Bag
S5:
Mosquito net
S6:
Mattress
S7:
Mattress fabric cover
S8:
Carrying bag
2