Total Remaining Battery Capacity; Add To Hems Swicth; Device Real-Time Monitoring - Zendure Solarflow 2400 Pro Bedienungsanleitung

EN

10.4.4 Total Remaining Battery Capacity

Displays the total remaining battery capacity; click to view the remaining capacity of different batteries

10.4.5 Add to HEMS Swicth

1. Turn on
When turned on, the device will be controlled by the HEMS. Manual control is not available, you can't use Ongrid
Settings, Battery Setting, Grid-connected Standards and Power Distribution Strategy.
2. Turn off
When turned off, the device will be removed from system control. You can use all the manual settings.
3. Design Goals
• Avoid conflicts between the HEMS and manual control at the same time.
• You are able to adjust device settings by yourselves.

10.4.6 Device Real-time Monitoring

1. Input (From PV)
The real-time PV input power of SolarFlow 2400 Pro.
3. Battery
The battery pack as a whole, real-time
data on discharge or charge power.
2. Input (From Grid/ Rooftop Solar System)
The real-time AC input power of SolarFlow 2400 Pro.
4. Output (AC outlet to home)
The real-time AC output power
of SolarFlow 2400 Pro.
22
5. Output (Off-grid Outlet to load)
The real-time AC output power of
SolarFlow 2400 Pro's off-grid outlet.