P1
•
lnsert the Adjustment Tool (P1) into the Upper limited adjustment hole (P3).
•
Turn clockwise to bring the canopy closer to the roller and anticlockwise to
increase the distance from the supporting bar.
•
lnsert the Adjustment Tool (P1) into the Lower limited adjustment hole (P5).
•
Turn clockwise to extend the canopy further and anticlockwise to extend it less.
•
Wait 30 minutes before restarting if the motor does not function after the adjustment.
•
The motor shall not be overloaded or used too frequently – this will affect
the motors service lite.
•
Keep the motor away from water or other liquid.
WARNING! Make sure that the awning's canopy extends and retracts from
the upper edge of the roller and not from the lower edge.
RIGHT
12
P3
"close" P2
"open" P4
Canopy
P5
WRONG
Canopy