prologue R0085P-N Handbuch Seite 8

Listening to preset radio stations
Press [ SET ] when the radio is switched on until the desired memory preset is
displayed. The frequency will appear on the display after a few seconds.
Changing a preset radio station
1. Turn on the radio and set it to a desired station.
2. Hold in [ SET ] until "ME" appears and a memory slot flashes on
the display.
3. Press [ ▲ ] or [ ▼ ] to select the memory slot which you wish to change.
4. Press [ SET ] to confirm and save the station.
Sleep timer
1. Press [ RADIO/SL ] twice. The letters "SL" will appear and "05" will begin
flashing on the display.
2. Press [ RADIO/SL ] agian to set the sleep timer for 15, 30, 45, 60, 75, 90
minutes or OFF.
3. Select one of the timer options and then wait a few seconds until
the display resumes normal clock mode. The radio will be on until the set
time has elapsed and then switch off.
4. The radio can be switched off at any time by pressing [
Time projection
Note: The alarm clock must be connected to the mains via the mains adaptor
for the projection function to work. The projection function will not work if
the alarm clock is powered by the backup battery.
• Press [ ▼ ] to switch the projection function on, press [ ▼ ] again to switch it off.
• Hold in [ ▼ ] to turn the projected time 180º.
• Turn the rotation knob to turn the projected time 90º.
Care and maintenance
• Clean the product using a lightly moistened cloth. Only use mild cleaning
agents, never solvents or corrosive chemicals.
• Unplug the mains adaptor from the wall socket and remove the batteries
from the product when the product is not to be used for a long time.
8
].