prologue R0085P-N Handbuch Seite 7

Nap function
1. Press [ NAP▲ ], the
the display.
2. Press [ NAP▲ ] to set the nap duration time: 5, 15, 30, 45, 60, 75 or
90 minutes. Set the preferred time and wait for a few seconds until
the display returns to normal clock mode and
to indicate that the nap function is activated.
3. The alarm will go off when the set time has elapsed, press [ NAP▲ ]
to switch off the alarm and the nap function.
the display.
Note: If one of the alarms goes off during the set nap time, the nap function
will be switched off.
Radio
1. Extend the FM aerial to its full length and switch the radio on by pressing
[ RADIO/SL ]. The current radio station frequency will be displayed.
2. Press [ ▲ ] or [ ▼ ] to tune into another frequency or hold in [ ▲ ] or [ ▼ ] to
automatically search for another station.
3. Press [ VOL ] to adjust the volume. "L07" will appear on the display. Press
[ ▲ ] to increase and [ ▼ ] to decrease the volume.
4. Press [
Note: If reception is poor, try to change the position of the aerial (or move
the clock radio) to improve reception.
Saving radio station presets
There are 10 preset memory slots available.
1. Turn on the radio and set it to a desired station.
2. Hold in [ SET ] until "MEM" appears and "01" (preset slot 01) flashes on
the display.
3. Press [ SET ] to save the station to memory slot 1.
4. Press or hold in [ ▲ ] or [ ▼ ] to search for the next desired station.
5. Hold in [ SET ] until "MEM" appears and "01" (preset slot 01) flashes on
the display.
6. Press [ ▲ ] or [ ▼ ] to select memory slot 2.
7. Press [ SET ] to save the station to memory slot 2.
8. Repeat the above procedure to save stations on the other memory slots.
symbol will appear and "n05" will flash on
] to switch the radio off.
7
appears on the display
will disappear from