Lightmaxx Vega PAR RGB Benutzerhandbuch Seite 17

Operation:
All connections of the device should be made before switching on. Use only high-quality
cables that are as short as possible for the connections.
Configuration of the DMX plugs:
Operating Mode DMX:
Connect the DMX input of your device to the DMX output of your DMX controller, your DMX
software or the DMX output of a device already in your DMX chain. Always use DMX cab-
le with a 110 Ohm resistor for this connection. Address the device according to your DMX
configuration. The device has a DMX mode with 8 channels, which is based on the following
functions:
Channel Value
CH1 0~255
CH2 1~255
CH3 1~255
CH4 0~255
CH5 0~255
CH6 0~255
CH7 0~255
Function
Dimmer
Strobe
Macro Function
Macro Function spee adjust
Red Dimmer
Green Dimmer
Blue Dimmer
17