Wincor Nixdorf BEETLE /iPOS plus Benutzerhandbuch Seite 76

0x2D
0x2E
0x2F
0x30
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
0x3A
0x3B
0x3C
0x3D
0x3E
0x3F-0x4E
0x4F
PEI Error Codes
0x50
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
68
Memory initialization. Programming memory timing information
Memory initialization. Configuring memory
Memory initialization (other).
Reserved for ASL (see ASL Status Codes section below)
Memory Installed
CPU post-memory initialization is started
CPU post-memory initialization. Cache initialization
CPU post-memory initialization. Application Processor(s) (AP)
initiali-zation
CPU post-memory initialization. Boot Strap Processor (BSP) selec-
tion
CPU post-memory initialization. System Management Mode
(SMM) initialization
Post-Memory North Bridge initialization is started
Post-Memory North Bridge initialization (North Bridge module
specific)
Post-Memory North Bridge initialization (North Bridge module
specific)
Post-Memory North Bridge initialization (North Bridge module
specific)
Post-Memory South Bridge initialization is started
Post-Memory South Bridge initialization (South Bridge module
specific)
Post-Memory South Bridge initialization (South Bridge module
specific)
Post-Memory South Bridge initialization (South Bridge module
specific)
OEM post memory initialization codes
DXE IPL is started
Memory initialization error. Invalid memory type or incompatible
memory speed
Memory initialization error. SPD reading has failed
Memory initialization error. Invalid memory size or memory mod-
ules do not match.
Memory initialization error. No usable memory detected
Unspecified memory initialization error.
Memory not installed
Invalid CPU type or Speed
CPU mismatch
CPU self test failed or possible CPU cache error
CPU micro-code is not found or micro-code update is failed
BEETLE /iPOS plus Benutzerhandbuch