Display POST Logo
This menu entry can be used to display the hardware devices which are
checked during the POST.
Configuration options: [Disabled] [Enabled]
Option ROM Messages
If the default option [Force BIOS] is used the BIOS itself decides whether
it is necessary to change the display mode or not. If the option [Keep
current] is chosen the current display mode stays confirmed.
Configuration options: [Force BIOS] [Keep current]
Launch Storage OpROM
Handle the boot option ROM for legacy mass storage devices.
Configuration Options: [Disabled] [Enabled]
'#n' Boot Device
These menu entries are used to specify the boot sequence from the availa-
ble devices. Every entry (from #1 till #n) specifies a boot device that found
during POST.
BBS Priorities
Specifies the priority sequence from available boot devices or even
disables boot devices from BBS.
BEETLE /iPOS plus Benutzerhandbuch
[Disabled]
[Force BIOS]
[Disabled]
63