PIKA GSM Interno Montage- Und Bedienungsanleitung Seite 24

4. ASSEMBLY
Attachments and Connections - Diagram
Insert SIM-Card
Assembly steps
For the right positioning of the GSM modem you find the precut
perforations on a holding plate under the pelletcontainer.
1. The mini antenna is screwed into the GSM modem.
2. Attach GSM modem to the assembly plate using M3 x 20 mm
slotted cheese head screws.
3. Then the supplied GSM assembly plate is attached with the two
M4 screws.
4. Connect the AC adapter to the GSM modem, plug the connector
into the adapter plug for the wiring harness.
Connect the mains plug, respectively the connected adapter plug
into the designated GSM plug of the wiring harness (first remove the
protection cap from the „GSM" plug).
5. Connect the connection cable to the GSM modem and the
designated slot of the main board