Setting The Clock - Amplicomms BigTel 48 Bedienungsanleitung

3.7 Setting the clock

The present time is shown in the display. To set the clock, please proceed as
follows:
1. Press the SET button beneath the display once. The hours figure in the
display starts to flash.
2. You can now enter the present time using the +/- button. To do this,
press the +/- button until you see the present hour in the display.
3. Now press the SET button again and the minutes figure in the display
starts to flash.
4. You can now enter the present number of minutes by repeatedly pres-
sing the +/- button.
5. The setting of the time is completed by pressing the SET button.
I
NSTALLATION
19