Change Message Tone Volume; Change Alarm Volume; Change Key Tone Volume; Change System Tone Volume - AURO Comfort 1010 Handbuch

7 Settings
NOTE
Pressing the M3 key takes
you back to the previous level
from any level.
Pressing the key
returns you to the idle mode.
7.2.2 Change Message
Tone Volume
7.2.3 Change Alarm Tone
Volume
7.2.4 Change Key Tone
Volume
7.2.5 Change System Tone
Volume

7.2.6 Alert Type

Press to open "Sound Setting"
Press to select "Set Volume"
Press to open "Set Volume"
Press to open "Ring Tone Vol."
Press to confirm your selection
Procedure to change "Message Tone Vol." (7 volume levels)
as in section 7.2.1 Change Ringtone Volume
Procedure to change "Alarm Tone Vol." (7 volume levels) as
in section 7.2.1 Change Ringtone Volume
Procedure to change "Key Tone Volume" (7 volume levels) as
in section 7.2.1 Change Ringtone Volume
Procedure to change "System Tone Vol." (7 volume levels) as
in section 7.2.1 Change Ringtone Volume
Procedure to change "Alert Type" (Ring Only, Vibration Only,
Vibrate And Ring, Vibrate Then Ring, Silent) as in section
7.2.1 Change Ringtone Volume
Press to select the volume
you desire
GB
19