Abus Smartvest FURM35000A Bedienungs-, Installations- Und Wartungsanleitung Seite 50

Connecting the detector to identical detectors
The wireless Smartvest smoke/heat detector can also be
connected to other wireless Smartvest smoke/heat detectors
without a Smartvest alarm panel. To do this, follow these steps:
1.
2.
3.
4.
5.
Displays and functions
Define one detector as the central detector.
Insert the batteries into the central detector and wait
3 seconds.
Press and hold the Test button on the central detector for
more than 10 seconds until the LED starts flashing quickly.
Now release the Test button.
Insert the batteries into the detector that is to be connected
to the central detector and wait a few seconds – the
connection will be established automatically.
Test whether the detectors have been successfully
connected to one another: To do so, press the Test button
on one of the detectors and hold it until it triggers an alarm
tone at least three times. The connected detectors now
signal the remote notification alarm state.
22