Abus Smartvest FURM35000A Bedienungs-, Installations- Und Wartungsanleitung Seite 47

Displays and functions
At the same time, the detector receiving notification of the alarm checks to
see how long the other detector has been sending the remote notification.
The pulsing alarm tone will stop sounding 60 seconds after the detector
which triggered the alarm is muted.
To reduce this time, the pulsing alarm tone can be stopped after just
30 seconds by pressing the Test button (for 1 second).
Test alarm triggered by remote notification
Carry out the test as described in the "Testing the device electronics"
chapter.
If additional wireless smoke/heat detectors are connected to Smartvest, they
will be notified of the test at this point and confirm the test for 60 seconds.
A loud, pulsing alarm tone sounds and the red LED flashes at the same time
at short intervals.
You can mute the detectors receiving the notification at an earlier point by
pressing the Test button (for 1 second) 30 seconds after starting the test.
19