Herunterladen Diese Seite drucken

Chasing Hydro 3 Benutzerhandbuch Seite 3

Precautions
Warning: Please read the User Manual carefully, and operate the product according to the
EN
instructions herein. The Company will not be responsible for any losses or injuries caused
by improper operation.
Warning: The parts of this product can only be disassembled and repaired by authorized
and trained professionals of the dealer, otherwise warranty will be invalid and personal
injury may be caused.
Warning: If the Cleaner is used at temperatures higher than the specified operating
temperature or exposed to intense sunlight for a long time, the high-temperature
protection will be triggered, making them powered off, or in severe cases, causing damage
to the product.
Warning: Children are not allowed to use this product without supervision by their parents.
Warning: Do not open, crush, heat or burn the battery case in the Cleaner to avoid the risk of
fire and burn.
Warning: Do not use the Cleaner again if its internal structure is damaged.
The Cleaner cannot be used in other working environments but only in the water of the pool.
No one is allowed to enter the pool while the Cleaner is working.
Do not touch the rotating part directly with your hands while the Cleaner is working.
Do not use this product in the pool if liquid flocculant or other clarifying agents are added
in the water, because the filter of the Cleaner may be blocked or damaged.
Please use the Cleaner in the following calibrated environment:
Operating depth
0.5-3m
Operating temperature
5-35℃
pH
7-7.8
Salt
Max. 5,000 ppm
Chlorine
Max. 4 ppm
02
Main parts
Cleaner
1. Slide switch (ON/OFF)
2. Indicator
3. Filter basket
4. Handle
5. Water outlet
6. Drive wheel
7. Active brush
8. Water inlet
9. Driven brush
10. Charging port
11. Salvage hook
��
��
EN
03
loading

Verwandte Produkte für Chasing Hydro 3