Cleaning The Grinding Mechanism; Troubleshooting; Safety Notices; Troubleshooting Table - Caso Design Baristachef Inox Pro Original Bedienungsanleitung

4.3 Cleaning the grinding mechanism

PLEASE NOTE

Handle the grinding mechanism and the grinding auger with care. They may be
sharp. Risk of injury!
1.
Remove the grinder insert from the grinding unit.
2.
Use the cleaning brush supplied with the grinder to clean the grinding mechanism
and the grinding auger underneath it.
3.
Reinsert the grinder insert, making sure that the notches are correctly aligned.

5 Troubleshooting

This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:

5.1 Safety notices

ATTENTION

Repairs of electrical appliances must be carried out by quali ed person who are
trained by the manufacturer.

Repairs performed by untrained persons may result in considerable hazards for the
user and damage the machine.

5.2 Troubleshooting table

Problem
The device does not start.
The device is blocked.
Error code E1
Error code E2
PLEASE NOTE

If you cannot solve the problem by carrying out the steps described above, our Cus-
tomer Service will help you free of charge.

Clean the device before you send it to customer service.
Solution
Please check whether the plug is properly plugged in.
The drip tray has over owed. Clean the device as descri-
bed.
The bean container is not correctly installed. Follow the
instructions in the "Assembly" section.
The device is overheated. Remove the plug from the
socket. Let the device cool down 20 minutes before you
try using it again.
The device has overheated and switches o automatical-
ly for protection. Unplug the power cord and wait until
the motor has cooled down.
CASO BaristaChef Inox Pro
DE
EN
FR
ES
IT
NL
SV
TR
PL
RO
HE
65