Alphacool EISBAER-Serie Bedienungsanleitung
Inhaltsverzeichnis
Verwandte Anleitungen für Alphacool EISBAER-Serie
Inhaltszusammenfassung für Alphacool EISBAER-Serie
- Seite 1 EISBAER...
- Seite 3 Alphacool Eisbaer Alphacool Eisbaer Intel Socket 775 /1156 / 1155 / 1150 / 1151 / 1366 / 2011 / 2011-3 / 2066 / 604 / 771 AMD Socket 754 / 939 / AM2 / AM2+ / AM3 / AM3+ / AM4 [ RYZEN ] / FM1 / FM2 / FM2+ /...
-
Seite 4: Mounting Material
mounting material - Montagematerial - Matériel de montage PWM-adapter version varies depending on the product you purchased screws bracket Intel 2011 / 2011-3 screws Intel Intel 775 / backplate 1156 / 1155 / 1150 / 1151 / 1366 / 604 / 771 screws springs Intel... - Seite 5 DC-LT 2600 ultra low noise en céramique se trouve directement au-dessus. Une ouverture pour le remplissage se trouve dans la partie supérieure. Ainsi le système peut facilement être nettoyé, rerempli et agrandi. Alphacool DC-LT Power consumption: 2,04W Operating voltage: 7 - 13,5V Flow rate: max.
- Seite 6 functionality / technology - Funktionsweise/ Technologie - fonctionnalité / technologie Full-copper radiator The use of copper in all important areas, like the front chamber, the The use of copper in all important areas, like the front chamber, the cooling fi ns and also the corresponding channels, raises cooling cooling fi ns and also the corresponding channels, raises cooling performance to a whole new level.
-
Seite 7: Schnellverschlusskupplung
functionality / technology - Funktionsweise/ Technologie - fonctionnalité / technologie Quick release Fitting Quick release Fitting Quick release Fitting Quick release Fitting The hoses are encased in anti-kink springs to prevent bending and the resulting blockage The hoses are encased in anti-kink springs to prevent bending and the resulting blockage of the water fl... - Seite 9 installation - Montage - montage Intel 775 / 1156 / 1155 / 1150 / 1151 / 1366 / 604 / 771 10-11 Intel 2011 / 2011-3 / 2066 12-13 754 / 939 / AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / 940 / C32 / G34 14-15 AM4 [ RYZEN ] 16-17...
-
Seite 10: Screw Mounting
Intel screw mounting - Schraubenmontage - montage de vis 1156 1155 1150 1151 1366 Select corresponding bracket + screws 1. Plug bracket together screw 2. Place compression springs and washers onto screws + attach to bracket with nuts spring ... - Seite 11 4. Mount the cooler – using the included backplate – onto the socket Hand-tighten screws crosswise Make sure that the window is facing upwards (or that the Alphacool logo is readable in the front). This ensures that the pump doesn’t run dry.
- Seite 12 Intel screw mounting - Schraubenmontage - montage de vis 2011 2011-3 2066 Select corresponding bracket + screws 1. Plug bracket together 2. Place compression springs and washers onto screws + attach to screw bracket with nuts spring Passende Halterung + Schrauben wählen 1.
- Seite 13 4. Mount the cooler onto the socket Hand-tighten screws crosswise Make sure that the window is facing upwards (or that the Alphacool logo is readable in the front). This ensures that the pump doesn’t run dry. 3. Wärmeleitpaste auf CPU auftragen 3.
- Seite 14 screw mounting - Schraubenmontage - montage de vis UNC 6-32 AM2+ AM3+ 10,5 FM2+ screw Select corresponding bracket + screws 1. Plug bracket together 2. Place compression springs and washers onto screws + attach to spring bracket with nuts washer ...
- Seite 15 (incluse avec la carte mère) Serrez les vis de manière croisé à la main Veillez que le fenêtre soit en haut (le logo Alphacool doit être lisible du front). Cette installation garantit que la pompe ne tournera pas à sec.
- Seite 16 screw mounting - Schraubenmontage - montage de vis RYZEN UNC 6-32 10,5 screw Select corresponding bracket + screws 1. Plug bracket together 2. Place compression springs and two different washers onto screws + attach to spring mount with nuts washer ...
- Seite 17 (incluse avec la carte mère) Serrez les vis de manière croisé à la main Veillez que le fenêtre soit en haut (le logo Alphacool doit être lisible du front). Cette installation garantit que la pompe ne tournera pas à sec.
- Seite 18 radiator mounting - Radiator Montage - montage de radiateur 1. Choose suitable place in your case 1. Passende Öffnung im Gehäuse wählen 1. Sélectionner ouverture appropriée dans le boîtier 2. Mount the radiator with M3 screws 2. Radiator mit M3 Schrauben montieren 2.
- Seite 19 connecting fans & pump - Lüfter & Pumpe anschließen - brancher ventilateur & pompe pump fan adapter 1. Connect fans with PWM adapter 1. Connect fans with PWM adapter 1. Lüfter mit PWM Adapter verbinden 1. Lüfter mit PWM Adapter verbinden 1.
- Seite 20 launch the system - Inbetriebnahme - mise en service If your Eisbaer AiO is unusually loud during initial operation, tipping the entire PC case back and forth a little can help. If your Eisbaer AiO is unusually loud during initial operation, tipping the entire PC case back and forth a little can help. The higher volume level of the pump occurs due to air bubbles in the closed system.
- Seite 21 5. Connect the radiators to a closed circuit Always combine red with blue quick release parts 6. Add liquid Only use Alphacool Cape Kelvin Catcher (part no.: 18188) or pure distilled or osmosis filtered water for refilling. Using other liquids will void the manufacturer‘s warranty.
- Seite 22 Alle Eisbaer - Ready Produkte sind mit Schnellverschlüssen ausgestattet und damit im handumdrehen kombinierbar. Tous les produits Eisbaer-Ready sont équipés de raccords rapide et peuvent être combinés facilement. Alphacool Eiswand 360 CPU External Radiator with included reservoir and two pumps. Quick Connectors only included in the CPU bundle.
- Seite 24 Imprint: Alphacool International GmbH Marienberger Str. 1 38122 Braunschweig Head Office: +49 (0) 531 28874 - 0 Fax: +49 (0) 531 28874 - 22 E-Mail: info@alphacool.com General Manager: Fabian Noelte WEEE-Reg.-Nr.: DE 54464644 Trade Register: Amtsgericht Braunschweig HRB 202390 VAT.ID.Nr.:...