ALZA Wireless One-to-One Temperature Control Benutzerhandbuch Seite 8

Fix the bottom shell to the wall, and finally fix the wire, and cover the front shell on the
bottom shell.
Inspection steps
Install the intelligent touch screen thermostat in a place where it is easy for the user to
view the screen and adjust the temperature set point. And the thermostat is located in a
place that can represent the overall ambient temperature of the room. Avoid installing the
thermostat near hot and cold sources, such as vents, heaters, outdoors or in places where.
Common fault handling
Phenomena
Don't start up
LCD displays messy code
Display is normal, but there
is no output
Temperature displays error
Solutions
1. Check whether the battery is installed backwards.
2. Inspect whether the boot key is valid.
Whether the rear shell installation is deformed, it can be
loosened and reinstalled.
1. Check whether the boundary between the main control
board and the power board is damaged.
2. Check whether the output is connected to the wrong
wire.
Calibrate the panel temperature display via the first item
of advanced options.
8