ALZA Wireless One-to-One Temperature Control Benutzerhandbuch Seite 4

Application
Intelligent digital thermostat is a temperature controller suitable for floor heating systems.
Through comparing ambient temperature and set temperature, it control the working state
of the electric valve of the floor heating system to adjust the ambient temperature, which
is comfort and energy saving.
Operating instructions
ON/OFF key: Press the ON/OFF key to turn on and off once; Press shutdown again while
closing all valves.
Mode switch key: In the power-on state, press to switch the working mode. The LCD
indicates the manual mode and the display indicates the automatic mode.
Regulation key: In the startup state, press the button and the temperature will flash,
then rotate the outer frame to adjust the temperature setting.
Clock adjustment: In the power on state, press and hold the button for 5 seconds.
After the icon flashes, rotate the box to adjust. Press the button to switch between time
and week adjustment and press the button to save and exit.
Lock key function: In the power on state, press and hold the button for 5 seconds to
enter the lock button state on the panel. A lock icon appears at the bottom of the display
screen, indicating successful lock button locking.
Low temperature protection function
Advanced options enter the third option ON, the thermostat is in the shutdown state, when
the indoor temperature is lower than 5 degrees, the thermostat automatically turns on
heating, when the indoor temperature rises to 5 degrees, the thermostat automatically
turns off heating.
WiFi connection
When the temperature controller is turned off, press, and hold the up button for 5
seconds.
The WiFi icon on the temperature controller display screen will flash (slowly), and the
temperature controller will enter the code checking state.
In the list of (small household appliances) devices, find the temperature controller product
(Bluetooth + WiFi version) in the specified distribution mode.
Click the confirmation button on the page, select the WiFi in the device's work area that
can connect to the internet, enter the WiFi password, click Next, click "Connect" according
to the page prompts, find the prompt content, click "Prompt Content", and return to the
graffiti app to enter the distribution process.
4