ALZA Wireless One-to-One Temperature Control Benutzerhandbuch Seite 6

Code matching process:
1. Power on the receiving panel, the power indicator is long on. Press and hold the
code matching button, and the code matching indicator flashes.
2. Install three No. 5 batteries on the transmitting panel.
After turning off the power, press and hold the
code. When the code checking indicator light on the receiving panel remains on,
the code checking is successful.
Programming mode operation
In the startup state, press and hold the
mode. After entering programming mode, press the
rotate the outer frame to adjust various parameters, press the
minutes, and press the
the following time periods is the same as the first period. Press the
exit.
Key Option
Workday
Day off
button for 5 seconds to enter programming
button to adjust the temperature. The adjustment method for
Icon Time
1 06:00
2 08:00
3 11:30
4 12:30
5 17:00
6 22:00
1 08:00
2 23:00
button for 5 seconds to check the
button to switch parameters,
Adjustment
time
Rotate
Outer
Frame
6
button to adjust for
button to save and
Default Adjust
value temperature
Rotate
Outer
Frame