SimonsVoss PinCode-Terminal Kurzanleitung Seite 34

7. Battery management
1. Enter your User PIN.
2. Enter your transponder ID.
9
6.2 Verification mode
1. Activate your identification medium on the locking device.
2. Enter your User PIN.
9
7 Battery management
7.1 Battery warning levels
Your PIN code terminal warns you of depleted batteries in two stages.
Replace the battery.
warning level
1 (weak)
34 / 144
9 PIN code terminal beeps and flashes green twice.
Locking device engages.
PIN code terminal beeps and flashes green twice.
9
Locking device engages.
Effect
Opening is delayed 5 seconds.

During these five seconds, the PIN code terminal beeps

and flashes yellow.
After the delay, the locking device engages.

PinCode-Terminal
EN