SimonsVoss PinCode-Terminal Kurzanleitung Seite 30

5. Programming
3. Position the base plate.
4. Screw or anchor the base plate tightly.
5. Replace the cover.
6. Press the cover against the base plate and screw the cover back in
5 Programming
This list briefly describes all programming codes. Enter programming
mode (press 0 for more than 2 seconds) and enter the code.
You will find detailed descriptions on handling in LSM, among other
things, in the detailed manual.
Code Function (knowledge)
Unlock user with initial PIN
01
Change forgotten user PIN with re-
03
placement PIN
Delete user
04
Changing the user PIN
05
30 / 144
place.
PinCode-Terminal
Entire input
0 long + 01 + initial PIN +
User PIN (new) + User PIN
(new)
0 long + 03 + replacement PIN
+ User PIN (new) + User PIN
(new)
0 long + 04 + Master PIN +
transponder ID
0 long 05 + User PIN (old) +
transponder ID + User PIN
(new) + User PIN (new)
EN