Aqua Forte INVERSMART Handbuch Seite 103

3. Operation instruction
a. Screen Lock
1) Press "
2) Automatic Lock Period: 30 seconds if no operation
b. Power On
Press " " for 3 seconds to unlock screen. Press "
c. Temperature Setting
When the machine is on, press
d. Boost/Silence Mode
Press " " to switch among boost mode
Please choose boost mode
e. Heating / Cooling /Auto Mode(heating & cooling models only)
Press " " to switch among heating "
Heating mode "
Cooling mode "
Auto mode "
* When water inlet temperature is higher than setting point, automatic cooling mode starts.
* When water inlet temperature is lower than setting point, automatic heating mode starts.
Defrosting
f.
3) Automatic defrosting: When machine is auto defrosting,
working mode when it finishes.
4) Manual Defrosting: To enter forced defrosting mode, the compressor must be working more than 10
minutes. in heating mode, press "
seconds to start forced defrosting, "
defrosting stops.
(Remarks: the interval between forced defrosting should be more than 30 minutes.)
" for 3 seconds to lock or unlock the screen
for initial heating
": Water temperature setting range(18-40°C)
": Water temperature setting range(12~30°C)
": Water temperature setting range(12~40°C)
" to power on machine.
and to set temperature.
, silence mode
", cooling "
" and " " on touch controller simultaneously for 5
" is flashing and defrost starts, "
13
" and auto mode "
will flash, and return to previous
" stop flashing and
".