Maintenance; Declarations Of Conformity - Ruris Sds Max Rmx25050 Handbuch

EN
DISASSEMBLY OF SDS ACCESSORIES
Drills and chisels become very hot during operation. Change the drills or chisels after they have cooled.
1. Pull back the locking mechanism of the SDS chuck by hand.
2. The accessory can now be removed from the SDS chuck.
3. Push the SDS chuck locking mechanism forward again.
ENGINE SPEED SELECTOR
- The desired speed can be preselected with the selector. Turn the speed
selector to PLUS to increase the speed. To decrease the speed, turn the
speed selector in the MINUS direction. The right speed depends on the
materials being processed and the working conditions.
The use
Hold the rotary hammer firmly with both hands. Turn on the tool and apply
slight pressure to it. Pressing too hard on the tool will not increase its
effectiveness.
The rotary hammer must be lubricated with vaseline after approximately 40-
45 hours of operation. Use the special key to remove the cover from the top
of the device. Lubricate all available mechanical parts with about 50 g of
Vaseline.
Unplug the plug before performing cleaning operations.
Clean the ventilation slots regularly. The rotary hammer does not require special maintenance.
Never use water or chemical detergents to clean power tools. Wipe with a dry cloth.
Always store the rotary hammer in a dry place.
Keep the engine ventilation slots clean.
Do not dispose of electrical equipment, industrial electronics and components in
household waste! Information on WEEE. Considering the provisions of GEO 195/2005 -
regarding environmental protection and GEO 5/2015. Consumers will consider the
following indications for handing over electrical waste, specified below:
- Consumers have the obligation not to dispose of waste electrical and electronic equipment
(WEEE) as unsorted municipal waste and to collect this WEEE separately.
- The collection of these named wastes (WEEE) will be carried out through the Public Collection Service
within each county and through collection centers organized by economic operators authorized for the
collection of WEEE. Information provided by the Environmental Fund Administration
journal of the European Union.
- Consumers can hand in WEEE free of charge at the previously specified collection points.
Manufacturer: SC RURIS IMPEX SRL
Blvd. Decebal, no. 111, Administrative Building, Craiova, Dolj, Romania
Goal. 0351 464 632, www.ruris.ro, info@ruris.ro
Authorized representative: Eng. Stroe Marius Catalin – General Manager
Authorized person for the technical file: Eng.Alexandru Radoi – Production Design Director
Description of the machine: Demolition rotary hammer: it is a portable machine tool, intended for construction
work and material processing.
Product serial number: AADS0100001XRURMX25050 (where AA represents the last two digits of the year of
manufacture, characters 5 and 6 batch number, characters 7-11 product number).
Product: Rotary impact hammer for demolition
Model: RURIS
Motor : Electric, single-phase
Chuck: SDS MAX
6

6. MAINTENANCE

7. DECLARATIONS OF CONFORMITY

DECLARATION OF CONFORMITY CE
Impact energy: 45 J
Type: RMX25050
Power: 1700W
www.afm.ro or the