Technical Data - Ruris Sds Max Rmx25050 Handbuch

EN
Always check that the supply voltage is similar to the voltage indicated on the tool (machines with a
nominal value of 230V or 240V can be connected to a 220V supply).
If the drill head stiffens unexpectedly (causing a sudden, dangerous reaction), stop the tool immediately.
Be aware of the forces that occur as a result of stiffness (especially when drilling metal), always use the
auxiliary handle and maintain a safe posture.
Disconnect the plug from the power supply before making any adjustments or changing any accessories.
Use only accessories that match the correct slots for the rotary hammer chuck.
Note that the bit(accessory) will be hot, allow it to cool before changing it as it may cause burns.
Always ensure that the chisel or attachment being used is firmly seated in the chuck before starting work.
4

3. TECHNICAL DATA

Electric voltage
Power
Impact rate
Impact energy
Motor winding
Mandrel
Type Handle
Anti-vibration
system
Accessory
Handle vibrations
Net weight with
accessories
230-240V / 50Hz
1700W
2100bpm
45 J
Copper
SDS MAX
360⁰ rotatable
YES
1x sharp chisel 18x320 mm
1X flat chisel 18x320 mm
1x auxiliary handle
1x pair of coals
1x vaseline tube
1x key
ah,CHeq=20.989m/s
11 kg
2