General Presentation Of The Machine; Instructions For Use - Ruris Sds Max Rmx25050 Handbuch

EN
1) SDS MAX chuck.
2) Auxiliary grip handle.
3) Auxiliary handle fixing nut.
4) Lubrication hole cover.
5) Ventilation.
6) Engine speed selector.
7) Switch lock button.
8) On/Off button.
9) Handle.
10) Power cord.
Accessory:
•
1x sharp chisel 18x320 mm
•
1X flat chisel 18x320 mm
•
1x auxiliary handle
•
1x pair of coals
•
1x vaseline tube
•
1x key
The extra handle allows you to get better stability while using the rotary hammer. The attachable handle
provides additional support and allows you to work without much effort. It is intended for both right-
handed and left-handed people. To adjust :
•
Loosen the auxiliary handle lock nut.
•
Attach the extra handle grip to the front.
•
Then rotate the attachable handle to the desired position
•
Tighten the handle lock nut.
ON/OFF
To start the rotary hammer press the start button (A), for continuous
operation press the button (B). To stop the rotary hammer, quickly (shortly)
operate the button (A).
ACCESSORY
Each type of material requires a different type of accessories. Choose
the right accessory.
When choosing the size of the drill or chisel, follow the maximum
dimensions mentioned in the specifications.
INTRODUCING/CHANGING SDS ACCESSORIES
This rotary hammer is equipped with an SDS MAX chuck, which
allows easy insertion and removal of chisels/drills. Always clean the
rod with a cloth and apply a thin layer of lubricant before inserting the
attachment.
1. Pull back the SDS chuck locking mechanism by hand.
2. Insert the chisel into the hammer and rotate it gently until you feel it snap into place. Make sure the
chisel shaft fits properly in the chuck.
3. Push the SDS chuck locking mechanism forward. Check that the inserted accessory is secured.
5

4. GENERAL PRESENTATION OF THE MACHINE

5. INSTRUCTIONS FOR USE