Xoop Lighting NANOBAR FC Bedienungsanleitung Seite 19

19
EXPLANATION MENU
DMX ADDRESS
The DMX address can be set here.
1. Press „ENTER" button and then „UP" or „DOWN" button until „DMX ADDRESS" is
showed
2. Press „ENTER" button again and then „UP" or „DOWN" button for the desired DMX
address
CHANEL MODE
The right chanel mode can be set here. More information about the different chanel modes can
be found on page 21 & 22.
1. Press „ENTER" button and then „UP" or „DOWN" button until „CHANEL MODE" is
showed
2. Press „ENTER" button again and then „UP" or „DOWN" for the desired chanel mode
DIM CURVE
In this menu the dimmer curve can be set.
1. Press „ENTER" button and then „UP" or „DOWN" button until „DIM CURVE" is showed
2. Press „ENTER" again and set with „UP" or „DOWN" for the desired dimmer curve
DMX STATE
Here you can set how the spotlight should react when the DMX signal is interrupted.
1. Press „ENTER" button and then „UP" or „DOWN" button until „DMX STATE" is showed
2. Press „ENTER" button again and then „UP" or „DOWN" button fort he right setting
3. DMX HOLD: The spotlight holds the last DMX value
4. BLACKOUT: The spotlight turns off
SLAVE MODE
Spotlight goes into the SLAVE mode. It copies the master spotlight in the DMX chain.
1. Press „ENTER" button and then „UP" or „DOWN" button until „SLAVE MODE" is
showed
2. Press „ENTER'' button again to activate „SLAVE MODE''