ghd Flight+ Handbuch Seite 4

warning: keep away from water:
EN
Do not store near water.
1.
Do not immerse or put under running water,
2.
even for cleaning purposes.
Do not reach for the appliance if it has fallen
3.
into water.
Do not leave within the reach of children.
4.
The ghd flight must be unplugged from the mains socket:
1. before cleaning and maintenance procedures.
2. if it is not working correctly.
3. as soon as you have finished using it.
4. if you leave the room, even momentarily.
The ghd flight is equipped with a heat-sensitive safety cut out device. In the event of overheating
(for example if the rear grill is blocked), the dryer will stop automatically. Isolate the dryer from
the mains supply and allow to cool before using again.
If your ghd flight has broken or does not work correctly immediately stop using and contact ghd
(Jemella Ltd), see contact details.
Your ghd flight should only be repaired using specialist tools and by qualified experts at ghd.
warning: electricity
Failure to comply with these safety precautions may result in electric shock or other injuries!
5
variable voltage
Your ghd flight is fitted with a dual voltage selector (Fig.1). To use this feature simply
insert a coin to switch the ghd flight to accept the required incoming voltage i.e. 120V
or 240V.
Note: Before using this product
please ensure that you check
that the voltage selector is set
for the correct voltage and do
not operate the voltage selector
when the product is in use.
If in doubt contact a qualified
person.
using your ghd flight
TM
1. After washing your hair, towel-dry it thoroughly.
2. Do not allow excess water from your hair or any other source to contact the ghd flight.
3. For fast drying, use the ghd flight without the styling nozzle.
4. Note: The fit of a cold nozzle could be tight, particularly when the dryer and nozzles are new.
5. Never cover the blower or intake opening.
6. Use the selector switch, to set the fan speed and the drying temperature:
= Off = Cool = Medium
7. When drying or styling, do not allow any of your hair to cover or come into contact with the air inlet grill
at the back of your dryer.
Figure 1
Dual Voltage
Selector
= High
6