Technical Data - Contest Vrdm-Control Benutzerhandbuch

VRDM-CONTROL -
- When the update is complete, the display shows CONTINUOUS/FINISH.
- Select CONTINUE if you need to program the fixture with another file. Select the next file and start program-
ming, then repeat these operations for all the files to be programmed.
- Select FINISH if you have finished programming. Communication with the projector will be interrupted and it
will be reset.
- Go to the projector menu to check that the version displayed is the latest one.
Notes :
• Make sure your micro-SD card is formatted in FAT.
• If updates are required, download them from www.architectural-lighting.eu
• It is possible to update the firmware of the VRDM-CONTROL box by following the same process. This operation
requires the use of two boxes and an XLR male / XLR male adapter.
4.5 - Screen 5 : Settings menu
This menu is used to set VRDM-CONTROL parameters.
4.5.1 : Readout :
Selects the unit in which DMX values are displayed: Percentage / Decimal / Hexadecimal.
4.5.2 : Identify Default :
Enables or disables projector identification when in the RDM menu (4.2): If this option is set to OFF, the selected
projectors will no longer flash.
4.5.3 : Device Off Timer :
Enables or disables VRDM-CONTROL automatic shutdown.
4.5.4 : LCD Bightness :
Adjusts LCD brightness.
4.5.4 : LCD Off Timer :
Allows you to set the time before the LCD screen switches off automatically: from OFF (no switch-off) to 30
minutes.
4.5.5 : Service :
Allows you to return to factory settings and enter a password.
4.5.5.1 : Factory reset :
Returns to factory settings: YES/NO.
Confirm with ENTER.
4.5.5.2 : Factory reset :
Enter password: from 0 to 255.
Confirm with ENTER.
4.6 - Screen 6 : Device Info menu
Displays VRDM-CONTROL firmware version and battery level.

5 - Technical data

- Power supply: USB-C, 5 V, 500 mA
- Input/outpout DMX: XLR 3 and 5 pins
- Micro SD card: < 2 Go, FAT formatted
- Weight : 470 g
- Dimensions : 154 x 76 x 49 mm
Contest Architectural RDM updater controller English
Page 11