Hama 00053103 Bedienungsanleitung Seite 33

d Bedienungsanleitung
1.4 Assembling and commissioning the unit
When confi guring the camera for the fi rst time, we recommend that you use the cable provided to connect the wireless LAN IP
camera to a PC or notebook.
Please note: it is not possible to have both a LAN and WLAN connection at the same time. Connecting an RJ-45 cable to the network
port automatically deactivates the WLAN connection.
You can use the tripod to mount the camera on a wall or on the ceiling as well as for running it in an upright position. Use the provided
assembly material for attaching the camera to a wall or to the ceiling. Attach the camera to the tripod using the tripod mount (9) on
the back of the camera.
Attach the provided WLAN antenna to the SMA antenna connection (1).
Then attach the 230 V power supply unit to a mains socket and to the camera's power connection (6).
If the displayed image is blurred, use the focus ring (5) to make it sharper.
If you would like to use the camera's audio playback function, connect an external loudspeaker to the line-out output (9) on the
camera.
1.5 IP address
The default IP address of the camera is: 192.168.2.3.
If your home network does not have an address in the 192.168.2.XXX range, you have to change the IP address of the network card of
the PC or notebook that the camera is connected to.
Proceed as follows to do so: Start -> Settings -> Network Connections
Select Network Connections.
Right-click the connection you want and select Properties.
32